В первом разделе выпускной квалификационной работы бакалавра представлен анализ технологичности обрабатываемой детали «Стакан», решены вопросы выбора заготовки и методов формообразования, проведена разработка технологического процесса изготовления детали, выбор оборудования и оснастки, расчет режимов резания, нормирование операций и размерная наладка. Во втором разделе выпускной квалификационной работы бакалавра представлен процесс проектирования режущих инструментов: фасонный призматический резец, комплект метчиков и червячная фреза. В третьем разделе выпускной квалификационной работы бакалавра представлен анализ загрузочных устройств, выбор оптимальной схемы резания произведен расчет накопителя, построена циклограмма.

The first technological part of the Bachelor work contains workability analysis of the manufactured part “Sleeve”. This part includes determination of different possible ways of manufacturing and choosing the economically profitable type. Firstly, workpiece has been chosen. Afterwards, the technological process and manufacturing routes have been designed and a wide range of additional operations have been carried out. Secondly, the equipment has been selected. Then dimensional adjustments, cutting modes and timenorms were analyzed and calculated. Afterwards, the technical drawings and documentation have been formed. The following second part of the Bachelor work contains detailed calculation and designing of metal cutting attachments, used on different operations of the manufacturing process of the produced machine-part, such as shaped prism cutting tool, a tap set and a gear hobbing cutter. In addition, this part includes detailed drawings and technical documentation This section presents the results of the analysis of boot devices, the choice of the optimal scheme, the calculation of accumulation, a sequence diagram is constructed.