Table | Card | RUSMARC | |
Allowed Actions: –
Action 'Read' will be available if you login or access site from another network
Action 'Download' will be available if you login or access site from another network
Group: Anonymous Network: Internet |
Annotation
В ходе данной исследовательской роботы была разработана параметрическая модель активного протеза пальца кисти, предложена технология его производства с учетом особенностей изготовления по наиболее доступной технологии 3D-печати экструзии из сопла, рассчитаны значения необходимых параметров в зависимости от антропометрических размеров усеченной части пальца (длина и обхват поврежденной конечности) и здоровой конечности (ее длины). Был рассмотрен процесс создания протеза, начиная от работы в компьютерной программе, и заканчивая выдачей протезного устройства пациенту. Также в работе была предложена возможность дистанционного взаимодействия с пациентом, наличие с ним обратной связи. Была рассмотрена каждая деталь протеза, ее эскиз и размеры, был напечатан прототип протеза. Было проведено исследование, в котором измерялись необходимые для данного протеза антропометрические размеры пальцев, проведен анализ полученной информации. Также была рассмотрена актуальность проводимого исследования.
In the course of this research robot was developed a parametric model for the active prosthetic thumb, the technology of its production with the features of workmanship at the most affordable technology of 3D printing extrusion from the nozzle, the calculated values of the needed parameters depending on the anthropometric dimensions of the truncated part of the finger (length and girth of the limb) and healthy limbs (its length). The process of creating a prosthesis was considered, starting from working in a computer program, and ending with the issuance of a prosthetic device to the patient. The paper also suggested the possibility of remote interaction with the patient, the presence of feedback with him. Every detail of the prosthesis, its sketch and dimensions were considered, and a prototype of the prosthesis was printed. A study was conducted in which the anthropometric dimensions of the fingers required for this prosthesis were measured, and the information obtained was analyzed. The relevance of the research was also considered.
Document access rights
Network | User group | Action | ||||
---|---|---|---|---|---|---|
ILC SPbPU Local Network | All | |||||
Internet | Authorized users SPbPU | |||||
Internet | Anonymous |
Usage statistics
Access count: 21
Last 30 days: 0 Detailed usage statistics |