Table | Card | RUSMARC | |
Allowed Actions: –
Action 'Read' will be available if you login or access site from another network
Action 'Download' will be available if you login or access site from another network
Group: Anonymous Network: Internet |
Annotation
В данной выпускной квалификационной работе рассматриваются основные принципы расчета электрических режимов системы электроснабжения и выбора электротехнического оборудования, исследуется динамическая устойчивость системы и возможные меры по её повышению. Произведены расчеты, на основании которых осуществлен выбор типа и числа генераторов, трансформаторов, автотрансформаторов, также произведены расчеты по выбору сечений воздушных линий электропередачи. Изучена специфика расчета режимов работы системы электроснабжения путем аналитических расчетов, а также с помощью компьютерного моделирования в программном комплексе RastrWin. Уточнено количество и мощность компенсирующих устройств, произведен порядок необходимых мероприятий по поддержанию напряжений в узлах системы на оптимальном уровне. Получены значения токов и напряжений при двухфазном коротком замыкании на землю в точке, заданной согласно варианту выполняемой работы, после чего в программном комплексе Dymola произведен анализ динамической устойчивости системы, применены меры по повышению устойчивости путем регулирования каналов АРВ-СД и задействования импульсной разгрузки турбины. Полученные результаты могут быть применены при проектировании системы электроснабжения 500/220 кВ.
In this final qualification work,the basic principles of calculating the electrical modes of the power supply system and the selection of electrical equipment are considered,the dynamic stability of the system and possible measures to increase it are investigated.,Calculations were made,on the basis of which the type and number of generators,transformers,autotransformers were selected,and calculations were also made on the choice of cross-sections of overhead power lines. The specifics of calculating the operating modes of the power supply system by analytical calculations,as well as by computer simulation in the RastrWin software package,was studied. The number and power of compensating devices were clarified,the order of the necessary measures was taken to maintain the voltage in the system nodes at the optimal level. The number and power of compensating devices were clarified,the order of the necessary measures was taken to maintain the voltage in the system nodes at the optimal level. The values of currents and voltages obtained for a two-phase short circuit to ground at a point specified according to the version of the work to be performed. The dynamic stability of the system was analyzed in the Dymola software package,measures were taken to increase stability by regulating the channels of the AVR and using pulse discharge of the turbine.,The results can be applied in the design of the 500/220 kV power supply system.
Document access rights
Network | User group | Action | ||||
---|---|---|---|---|---|---|
ILC SPbPU Local Network | All | |||||
Internet | Authorized users SPbPU | |||||
Internet | Anonymous |
Usage statistics
Access count: 10
Last 30 days: 0 Detailed usage statistics |