Таблица | Карточка | RUSMARC | |
Разрешенные действия: Посмотреть |
Аннотация
Исследовано влияние состава электролита на достижение эффекта полирования титановых сплавов при реализации процесса электролитно-плазменного полирования. Исследования проведены на примере полирования титанового сплава ВТ6 в трехкомпонентном водном электролите, содержащем NaF, NH[2]OH*HCl и KCl. Показано, что в зависимости от соотношения концентрации солей-протолитов NaF и NH[2]OH*HCl на обработанной поверхности может наблюдаться либо образование оксидных пленок, либо их анодное растворение в присутствии лиганда с получением чистой неанодированной поверхности металла, сопровождаемое снижением шероховатости (эффект полирования). Установлено, что эффект полирования достигается при определенном соотношении NaF и NH[2]OH*HCl, обеспечивающем образование в нем фтороводорода в количестве, достаточном для растворения образующихся на обрабатываемой поверхности оксидных пленок.
Electrolyte-plasma polishing (EPP), also known as electrolyte-plasma treatment (EPT) has become widespread in industry as an alternative to traditional chemical, electrochemical and mechanical methods of improving the surface quality of products made of metallic materials. EPP is an innovative technology used to obtain metal surfaces with low roughness and a high gloss. Electrolyte-plasma polishing is widely used in aerospace, biomedical, precision instrumentation and other. This work is devoted to the study of the effect of the electrolyte composition on achieving the effect of polishing titanium alloys during the implementation of the EPP process. The studies were carried out on the example of polishing a titanium alloy VT6 (Ti - 6 Al - 4 V) in a three-component aqueous electrolyte containing NaF, NH[2]OH*HCl and KCl. It was shown that, depending on the concentration ratio of NaF and NH[2]OH*HCl protolyte salts, either the formation of oxide films or their anodic dissolution in the presence of a ligand can be observed on the treated surface, with the production of a clean, non-anodized metal surface, accompanied by a decrease in roughness (polishing effect). It is established that the polishing effect is achieved at a certain ratio of NaF and NH[2]OH*HCl, which ensures the formation of hydrogen fluoride in it in an amount sufficient to dissolve the oxide films formed on the treated surface.
Входит в состав
Статистика использования
Количество обращений: 15
За последние 30 дней: 1 Подробная статистика |