Table | Card | RUSMARC | |
Allowed Actions: –
Action 'Read' will be available if you login or access site from another network
Group: Anonymous Network: Internet |
Annotation
Данная работа посвящена разработке численной модели металлокассеты из металла в составе навесной фасадной системы на основе лабораторных испытаний. Для решения поставленных задач применялись эмпирические и общелогические методы исследования, которые заключались в проведении натурных испытаний и численном моделировании методом конечных элементов. На основании результатов лабораторных испытаний были определены граничные условия для создания численной модели металлокассет из оцинкованной стали и алюминиевого сплава, а также построены графики зависимости прогибов панелей от действующей нагрузки. По полученным графикам были вычислены предельные нагрузки, соответствующие потере несущей способности металлокассет в результате достижения панелью предельного прогиба. Произведен статический расчет численных моделей металлокассет на действие равномерно распределенной нагрузки и выполнена проверка по I и II группам предельных состояний. На основании результатов расчета выявлены преимущества использования разработанных численных моделей при проектировании навесных фасадных систем по сравнению с использованием существующего аналитического расчета. Разработанная численная модель может быть использована для оценки несущей способности фасадных кассет других габаритов, форм и типов, что имеет практическую значимость в проектировании фасадных конструкций зданий и сооружений. Для достижения полученных результатов использовались современные программные комплексы, такие как SCAD Office и Microsoft Office.
This work is devoted to the development of a numerical model of a hinged facade system with facing by metal cassette based on laboratory tests. To solve these tasks, empirical and theoretical research methods were used, which consisted in conducting laboratory tests and numerical modeling by the finite element method. Based on the results of laboratory tests, boundary conditions were determined for creating a numerical model of metal cassettes made of galvanized steel and aluminum alloy, and graphs of the dependence of panel deflections on the operating load were constructed. According to the obtained graphs, the maximum loads corresponding to the loss of the bearing capacity of metal cassettes because of the panel reaching the maximum deflection were calculated. Static calculation of numerical models of metal cassettes for the action of a uniformly distributed load was performed, verification was performed for checking the panel according to USL and SLS criteria. Based on the results of the calculation, the advantages of using the developed numerical models in the design of hinged facade systems are revealed in comparison with the use of the existing analytical calculation. The developed numerical model can be used to assess the load-bearing capacity of facade cassettes of other dimensions, shapes and types, which is of practical importance in the design of facade structures of buildings and structures. To achieve the results obtained, modern software systems such as SCAD Office and Microsoft Office were used.
Document access rights
Network | User group | Action | ||||
---|---|---|---|---|---|---|
ILC SPbPU Local Network | All | |||||
Internet | Authorized users SPbPU | |||||
Internet | Anonymous |
Usage statistics
Access count: 8
Last 30 days: 0 Detailed usage statistics |