Table | Card | RUSMARC | |
Allowed Actions: Read Download (3.9 Mb) Group: Anonymous Network: Internet |
Annotation
Проведены трибологические испытания на машине трения СМЦ-2 по схеме «Ролик – Абразивный ролик», без смазки. Построена упрощенная карта режимов изнашивания износостойких сталей (Hardox 550, Hardox 500, Hardox 450), по сравнению с конструкционной сталью 09Г2С, по методу Лима - Эшби и Виллиамса. Выделены зоны критического, сильного и умеренного изнашивания. Получены сравнительные результаты сталей по механическим свойствам, износу, интенсивности изнашивания и контактной температуре. Проведены металлографические исследования поверхностей образцов до и после испытаний. Установлены механизмы износа.
Tribological tests were carried out on the SMC-2 friction machine according to the "Roller – abrasive roller" scheme, without lubrication. A simplified map of the wear modes of samples made of wear-resistant steels (Hardox 550, Hardox 500, Hardox 450), in comparison with structural steel 09G2C, according to the method of Lim - Ashby and Williams. The zones of critical, hard and moderate wear are highlighted. Comparative results of steels on hardness, wear, wear intensity and contact temperature are obtained. Metallographic studies of the sample surfaces before and after the tests were carried out. Wear mechanisms are installed.
Usage statistics
Access count: 113
Last 30 days: 32 Detailed usage statistics |