Детальная информация

Название Arbitrary quadrangular finite element for plates with shear deformations // Magazine of Civil Engineering. – 2021. – № 7 (107). — С. 10707
Авторы Tyukalov Yu. Ya.
Выходные сведения 2021
Коллекция Общая коллекция
Тематика Строительство ; Строительная механика ; quadrangular finite elements ; shear deformations ; deformation plates ; flexible plates ; bending end elements ; finite element method ; четырехугольные конечные элементы ; сдвиговые деформации ; деформационные пластины ; гибкие пластины ; изгибающиеся конечные элементы ; метод конечных элементов
УДК 624.04
ББК 38.112
Тип документа Статья, доклад
Тип файла PDF
Язык Английский
DOI 10.34910/MCE.107.7
Права доступа Свободный доступ из сети Интернет (чтение, печать, копирование)
Ключ записи RU\SPSTU\edoc\67973
Дата создания записи 22.03.2022

Разрешенные действия

Прочитать Загрузить (0,6 Мб)

Группа Анонимные пользователи
Сеть Интернет

An arbitrary quadrangular bending finite element based on a piecewise constant approximation of moments is proposed. The solution is based on the principles of minimum additional energy and possible displacements. The finite element allows you to consider the shear deformation, regardless of the ratio of the plate thickness to its sizes. The effect of locking in the calculation of thin plates is absent. Comparison of the results of the oblique plates calculation, annular and round plates with analytical solutions and calculation results for other programs was done. The comparison shows good accuracy in determining displacements and moments. Crushing the finite elements mesh makes the displacement values tend to exact values from above. To assess the influence of the finite element shape, the square plate calculations were made. To model the square plate, quadrangular elements were used, obtained from rectangular ones by changing the slope of one side. At the same time, the calculating accuracy of the displacements and moments decreased slightly. The proposed finite element is easy to implement. The problem solution did not require a numerical integration or the mapping of the quadrangular region to the rectangular one. The necessary expressions were obtained analytically.

Место доступа Группа пользователей Действие
Локальная сеть ИБК СПбПУ Все
Прочитать Печать Загрузить
Интернет Все
  • Arbitrary quadrangular finite element for plates with shear deformations
    • 1. Introduction
    • 2. Methods
    • 3. Results and Discussions
    • 4. Conclusion

Количество обращений: 289 
За последние 30 дней: 10

Подробная статистика