Details

Title Influence of electric current on the mineral matrix of technogenic anhydrite // Magazine of Civil Engineering. – 2025. – Т. 18, № 1. — С. 13302
Creators Gumeniuk A. N. ; Gordina A. F. ; Petrynin S. M. ; Buryanov A. F. ; Skeeba V. Y.
Imprint 2025
Collection Общая коллекция
Subjects Химическая технология ; Вяжущие вещества ; anhydrites ; technogenic anhydrites ; matrix of technogenic anhydrites ; anhyrite mineral matrices ; electric current ; fluorohydrites ; ангидриты ; техногенные ангидриты ; матрицы техногенных ангидритов ; минеральные матрицы ангидритов ; электрический ток ; фторангидриты
UDC 666.1
LBC 35.45
Document type Article, report
Language English
DOI 10.34910/MCE.133.2
Rights Свободный доступ из сети Интернет (чтение, печать, копирование)
Additionally New arrival
Record key RU\SPSTU\edoc\78118
Record create date 1/26/2026

Allowed Actions

Read Download (2.5 Mb)

Group Anonymous
Network Internet

The current conditions for the development of industrial and civil engineering in the regions with a negative average daily temperature require an increase in the economic efficiency of heating systems and reduction of the material consumption for its production and operation. One of the solutions to this problem is electrically conductive concrete. Cost reduction is achieved through the use of binders of anthropogenic origin. The electrically conductive concrete samples with dimensions of 70 multiply 70 multiply 70 mm and prototype product with dimensions of 500 multiply 500 multiply 50 mm were used for the assessment of the effect of the micro heating elements on the performance and physicochemical properties of mineral matrix. The electrically conductive concrete was based on waste of anthropogenic origin (fluorine-anhydrite) and fine aggregates. The additives in the form of 7% technical soot suspension and 1% of carbon fiber were used as micro heating elements. The physical and technical studies were carried out on the 28th day after 3 cycles of heating and cooling of the samples. The obtained results confirm that carbon fiber reduces the specific volume resistance up to 8.5 kOhm*cm. It allows the usage of proposed compositions for the manufacture of large-format heating elements. The experimental operation of large-format heating elements based on the developed compositions made it possible to determine its thermophysical characteristics. The heating of the elements surface from 21.9 to 28.5 C for 40 minutes were obtained. Thus, the use of the developed prototype as heating elements is possibly provided that the pre-installed electrodes are protected from electrochemical corrosion. The electrochemical corrosion must be established through the use of methods of physicochemical analysis.

Network User group Action
ILC SPbPU Local Network All
Read Print Download
Internet All
  • Influence of electric current on the mineral matrix of technogenic anhydrite
    • 1. Introduction
    • 2. Materials and Methods
    • 3. Results and Discussion
      • 3.1. Analysis of Physical and Technical Properties and Specific Volume Resistance
      • 3.2. Study of Thermophysical and Physicochemical Properties
    • 4. Conclusions

Access count: 12 
Last 30 days: 12

Detailed usage statistics