Table | Card | RUSMARC | |
Allowed Actions: –
Action 'Read' will be available if you login or access site from another network
Action 'Download' will be available if you login or access site from another network
Group: Anonymous Network: Internet |
Annotation
В данной работе рассмотрена возможность получение поля с индукцией 100 Тл в неразрушающемся квазибессиловом магните с инерционным удержанием его торцевой части. Эта часть магнита уравновешена с помощью диамагнитного экрана, который удерживается инерционно благодаря сокращению длительности импульса до значения порядка 10 мкс. Создана модель магнита, в программе Comsol Multiphisics рассчитано поле, энергия, индуктивность системы и рассчитана сила, действующая на экран. В результате было получено, что в поле с индукцией 100T эта сила являются величиной порядка 1.46∙106 H. Выбраны параметры емкостного накопителя энергии, создающего ток с необходимой амплитудой и длительностью импульса. При выбранной форме и длительности импульса рассчитана масса экрана, равная 10 кг обеспечивающее либо его допустимое перемещение за время импульса, либо удержание с помощью системы болтов. Чтобы механические напряжения не превышали 400 МПа, при такой массе необходимо 4 стальных болта, что вполне приемлемо.
In this work, the possibility of obtaining a field with induction of 100 T in a non-destructible quasi-forceless magnet with inertial retention of its end part is considered. This part of the magnet is balanced by means of a diamagnetic screen, which is held inertia due to a reduction in the pulse duration to a value of the order of 10 μs. A magnet model was created, the Comsol Multiphisics program calculated the field, energy, inductance of the system and calculated the force acting on the screen. As a result, it was found that in a field with 100T induction, this force is of the order of 1.46 ∙ 106 H. The parameters of a capacitive energy storage device that creates a current with the required amplitude and pulse duration are selected. With the selected shape and duration of the pulse, the screen mass is calculated equal to 10 kg, providing either its permissible movement during the pulse, or retention using a system of bolts. So that mechanical stresses do not exceed 400 MPa, with such a mass, 4 steel bolts are necessary, which is quite acceptable.
Document access rights
Network | User group | Action | ||||
---|---|---|---|---|---|---|
ILC SPbPU Local Network | All | |||||
Internet | Authorized users SPbPU | |||||
Internet | Anonymous |
Usage statistics
Access count: 3
Last 30 days: 0 Detailed usage statistics |