Table | Card | RUSMARC | |
Allowed Actions: –
Action 'Read' will be available if you login or access site from another network
Action 'Download' will be available if you login or access site from another network
Group: Anonymous Network: Internet |
Annotation
Первый раздел выпускной квалификационной работы посвящен, разработке технологического процесса для детали «Втулка». На основе анализа чертежа детали «Втулка» был спроектирован полный комплект технологической документации, подобраны оборудование, рассчитаны режимы резания и нормы времени для операций. Второй раздел выпускной квалификационной работы посвящен режущему инструменту. По исходным данным были спроектированны дисковый фасонный резец, комплект метчиков и червячная фреза. В качестве исходных данных для проектирования дискового фасонного резца был выдан чертеж профиля детали, для проектирования комплекта метчиков были выданы параметры резьбы и материал детали, для проектирования червячной фрезы были выданы параметры нарезаемого колеса и параметры исходной рейки. Третий раздел выпускной квалификационной работы посвящен автоматизации одного технологического перехода точение фаски н7а детали «Валик». В ходе выполнения технического задания были подобраны: загрузочное устройство, механизм ориентации, питатель, отсекатель и пневмоцилиндр.
The first section of the final qualification work is devoted to the development of the technological process for the "Bushing" part. Based on the analysis of the drawing of the "Bushing" part, a complete set of technological documentation was designed, equipment was selected, cutting modes and time standards for operations were calculated. The second section of the final qualification work is devoted to the cutting tool. According to the initial data, a disk shaped cutter, a set of taps and a worm mill were designed. As initial data for designing disk-shaped cutter was issued a profile drawing parts for the design of a set of taps were given options of thread and material, for the design of hob was issued parameters of the cut wheel, and the settings of the source of Reiki. The third section of the final qualification work is devoted to automatization of one technological transition turning the chamfer h7a details "WA-lik". During the performance of the technical task, the following components were selected: loading device, orientation mechanism, feeder, cut-off and pneumatic cylinder.
Document access rights
Network | User group | Action | ||||
---|---|---|---|---|---|---|
ILC SPbPU Local Network | All | |||||
Internet | Authorized users SPbPU | |||||
Internet | Anonymous |
Usage statistics
Access count: 67
Last 30 days: 3 Detailed usage statistics |