Table | Card | RUSMARC | |
Allowed Actions: –
Action 'Read' will be available if you login or access site from another network
Group: Anonymous Network: Internet |
Annotation
Тема выпускной квалификационной работы: «Напряженно-деформированное состояние каркасно-модульного элемента типового здания общежития». Данная работа посвящена разработке каркасно-модульного элемента и исследованию его напряженно-деформированного состояния. Задачи, которые решались в ходе исследования: 1. Выполнить анализ области применения стального холодногнутого профиля в строительстве, также провести обзор существующих конструктивных решений на основе каркаса из стального холодногнутого профиля; 2. Верификация методики расчета на прочность и устойчивость внецентренно сжатого элемента сложносоставного сечения; 3. Выполнить конечно-элементный анализ испытуемой стойки; 4. Верификация методики расчета на прочность изгибаемого элемента сложносоставного сечения; 5. Составление расчетной схемы здания общежития из каркасномодульных элементов, обоснование использования сложносоставных сечений для балок и стоек каркасно-модульного элемента; 6. Расстановка вертикальных связей для выполнения условия по динамической комфортности; 7. Прочностной расчет стойки, балки и элемента перекрытия каркасномодульного элемента. При решении поставленных задач применялись методы лабораторных испытаний, численного расчета при помощи метода конечных элементов и сравнительного анализа. В результате проведенных исследований была разработана схема каркасномодульного элемента 3-х этажного здания общежития. На основании расчета на пульсационное ветровое воздействие было подобрано расположение вертикальных связей вдоль и поперек здания, а также тип связей с целью обеспечения условия по динамической комфортности. Были рассчитаны на прочность и устойчивость наиболее нагруженные стойки и балки каркасно-модульного элемента.
The topic of the graduate qualification work: "The stress-strain state of a framemodule element of a typical dormitory building". This work is devoted to the development of a frame-module element and the study of its stress-strain state. The tasks that were solved in the course of the study are: 1. Perform an analysis of the field of application of steel cold-bent profile in construction, also to review existing structural solutions based on a framework of steel cold-bent profile; 2. To verify the methods of calculation for strength and stability of noncentrally compressed element of complexly composite section; 3. Execute the finite element analysis of the tested stand; 4. Verification of the strength calculation procedure for a bending element of complexly composite cross-section; 5. Compilation of the calculation scheme of the dormitory building of framemodular elements, justification of the use of compound sections for beams and uprights of the frame-module element; 6. Arrangement of vertical ties to meet the condition for dynamic comfort; 7. Strength calculation of the rack, girder and overlapping element of the frame-module element. The methods of laboratory tests, numerical calculations by means of the finite element method and comparative analysis were used in solving the tasks. As a result of the studies, a scheme of a frame-module element of a 3-storey dormitory building was developed. Based on the calculation on the pulsational wind effect, the location of vertical ties along and across the building, as well as the type of ties to ensure the condition of dynamic comfort were selected. The most loaded struts and beams of the frame-module element were calculated for strength and stability.
Document access rights
Network | User group | Action | ||||
---|---|---|---|---|---|---|
ILC SPbPU Local Network | All |
![]() ![]() |
||||
Internet | Authorized users SPbPU |
![]() ![]() |
||||
![]() |
Internet | Anonymous |
Usage statistics
|
Access count: 0
Last 30 days: 0 Detailed usage statistics |