Table | Card | RUSMARC | |
Allowed Actions: –
Action 'Read' will be available if you login or access site from another network
Action 'Download' will be available if you login or access site from another network
Group: Anonymous Network: Internet |
Annotation
Данная работа посвящена углублению в анализ податливости стыков в крупнопанельных зданиях c целью анализа и выявления предпочтительного варианта для нетипового здания. Задачи, которые решались в ходе исследования: 1. Изучение имеющейся общей информации о каждой технологии 2. Создание корректных моделей с тщательной задачей нагрузки 3. Анализ полученных результатов и сравнительная оценка по каждому заявленному критерию, с дальнейшим созданием оптимальной модели. Работа была проведена на основании предоставленных документов, включающих в себя планы подвального, первого и типового этажей, смет, СТО, на основе которых было выполнено построение моделей и анализ полученных данных. В ходе работы были применены методы параметрического моделирования и сравнительного анализа. Использованы программные комплексы САПФИР 2017, Лира-САПР 2017, SCAD Office 21.1 для моделирования объемно-планировочных и конструктивных решений. В результате было рассмотрена работа стыков узлов соединения в сборных железобетонных элементах, произведен анализ факторов, влияющих на их податливость, а также создана расчетная модель здания с учетом податливости стыков и принято решению по выбору подходящих конструктивных решений для строительства крупнопанельного здания.
This work is devoted to a deeper analysis of the flexibility of joints in large-panel buildings in order to analyze and identify the preferred option for an atypical building. Tasks that were solved in the course of the study: 1. Review the available general information about each technology 2. Creating correct models with a thorough load task 3. Analysis of the results obtained and comparative evaluation for each declared criterion, with further creation of the optimal model. The work was carried out on the basis of the submitted documents, including plans for the basement, first and standard floors, estimates, service stations, on the basis of which the construction of models and analysis of the data obtained were performed. In the course of the work, the methods of parametric modeling and comparative analysis were applied. The software systems SAPHIR 2017, Lira-CAD 2017, and SCAD Office 21.1 were used to model space-planning and design solutions. As a result, the work of the joints of the joints in precast reinforced concrete elements was considered, the factors affecting their compliance were analyzed, and a design model of the building was created, taking into account the compliance of the joints, and a decision was made on the choice of suitable design solutions for the construction of a large-panel building.
Document access rights
Network | User group | Action | ||||
---|---|---|---|---|---|---|
ILC SPbPU Local Network | All | |||||
Internet | Authorized users SPbPU | |||||
Internet | Anonymous |
Usage statistics
Access count: 30
Last 30 days: 0 Detailed usage statistics |