Table | Card | RUSMARC | |
Allowed Actions: –
Action 'Read' will be available if you login or access site from another network
Action 'Download' will be available if you login or access site from another network
Group: Anonymous Network: Internet |
Annotation
Данная работа посвящена исследованию влияния окружающей за-стройки при расчете здания на ветровую нагрузку. Задачи, которые решались в ходе исследования: 1. Исследование влияния выступов (лоджий) на распределение давления ветра на фасаде; 2. Численное моделирование ветрового воздействия для здания с окружающей застройкой; 3. Сравнение результатов при различных положениях и высотах зданий; 4. Сравнение полученных результатов со значениями, посчитанными по нормативным документам; 5. Исследование влияния окружающей застройки на примере фасадных светопрозрачных конструкций. Работа проведена в ПК ANSYS FLUENT и AUTODESK CFD, так как данные программы обладают всеми необходимыми для данного типа расчета параметрами. Были произведены расчеты, показывающие различие результатов численного моделирования и расчета по нормативам. А также получены данные о давлениях на фасаде здания, при различном расположении и высоте окружающей застройки, в виде одиночного здания с наветренной стороны. В результате были получены данные о необходимости задания выступов на фасаде при создании геометрии для численного моделирования ветрового воздействия. Были получены ситуации расположения окружающей застройки, для которых расчет по нормативам не применим. Также было показано, что высоту окружающей застройки и расстояние до нее целесообразно выбирать как функцию от высоты целевого здания, а не как дискретную величину. В случае высоты окружающей застройки 0,25Н, где Н–высота целевого здания, тип местности следует определять как «тип местности С».
This work is devoted to the study of the influence of the surrounding buildings in calculating the building on wind load. The tasks that were solved during the study: 1. Investigation of the effect of protrusions (loggia) on the distribution of wind pressure on the facade; 2. Numerical modeling of wind impact for building with surrounding buildings; 3. Comparison of results at different positions and heights of buildings; 4. Comparison of the obtained results with values calculated according to regulatory documents; 5. Study the influence of surrounding buildings using the example of facade translucent structures. The calculations were done in the ANSYS FLUENT and AUTODESK CFD software, as these programs possess all the necessary options for that type of calculation. Calculations were made showing the difference between the results of numerical modeling and the calculation by standards. Also, data on pressures on the facade of the building were obtained, at different locations and heights of the surrounding buildings, in the form of a single building from the windward side. As a result, were obtained the necessity to specify protrusions on the elevation when creating geometry for numerical wind simulation. The situation of the location of the surrounding buildings was obtained, for which the calculation by standards is not applicable. It was also shown that the height of the surrounding building and the distance to it is advisable to choose as a function of the height of the target building, and not as a discrete value. In the case of the height of the surrounding building 0,25Н, where Н is the height of the target building, the terrain type should be defined as "terrain type C.".
Document access rights
Network | User group | Action | ||||
---|---|---|---|---|---|---|
ILC SPbPU Local Network | All | |||||
Internet | Authorized users SPbPU | |||||
Internet | Anonymous |
Usage statistics
Access count: 30
Last 30 days: 3 Detailed usage statistics |