Table | Card | RUSMARC | |
Allowed Actions: –
Action 'Read' will be available if you login or access site from another network
Group: Anonymous Network: Internet |
Annotation
Пристальное внимание в выпускной квалификационной работе уделено анализу технологичности нашей детали, разработке технологического процесса изготовления детали в условиях серийного производства, а также произведен сравнительный анализ базового и разработанного технологических процессов, применяемого оборудования, режущего и измерительных инструментов. В выпускной квалификационной работе разработан комплект технологической документации, выбрано основное оборудование, режущий и измерительный инструменты, с учетом принятого технологического процесса, произведен расчет режимов резания и норм времени, определен способ наименее материалозатратный и наиболее экономически выгодный способ получения заготовки. В конструкторском разделе спроектировано и рассчитано станочное приспособление, режущий инструмент. Спроектирован робото-технический комплекс на базе токарного станка с ЧПУ 16К20Ф3, где выбран промышленный робот, вспомогательное оборудование, произведены расчеты основных показателей РТК.
Close attention in the final qualifying work is paid to the analysis of the manufacturability of our part, the development of the technological process of manufacturing the part in the conditions of mass production, and a comparative analysis of the basic and developed technological processes, the equipment used, cutting and measuring tools. In the final qualifying work, a set of technological documentation was developed, the main equipment, cutting and measuring tools were selected, taking into account the accepted technological process, the cutting modes and time standards were calculated, the method of least material-consuming and the most cost-effective method of obtaining the workpiece was determined. In the design section, a machine tool and a cutting tool are designed and calculated. A robot-technical complex based on a CNC lathe 16K20F3 was designed, where an industrial robot and auxiliary equipment were selected, calculations of the main indicators of the RTK were made.
Document access rights
Network | User group | Action | ||||
---|---|---|---|---|---|---|
ILC SPbPU Local Network | All |
![]() |
||||
Internet | Authorized users SPbPU |
![]() |
||||
![]() |
Internet | Anonymous |
Table of Contents
- Titulny_1 (1)
- Макаров К. О. з3331505 _70501__
- Чертеж резца
Usage statistics
|
Access count: 5
Last 30 days: 0 Detailed usage statistics |