Table | Card | RUSMARC | |
Allowed Actions: –
Action 'Read' will be available if you login or access site from another network
Group: Anonymous Network: Internet |
Annotation
Тема выпускной квалификационной работы: Проектирование оптимальной технологии изготовления отливки «Картер».Данная работа посвящена разработке и выбору оптимальной литейной технологии с помощью моделирования литейных процессов в программном обеспечении. Задачи, которые решались в ходе исследования:Изучены технологические мощности завода-изготовителя;Рассмотрены современные средства моделирования литейных процессов;Изучена технология моделирования процессов заливки сплавов, распределения температуры в теле отливки;На основе полученных данных с моделирования литейных процессов, выбраны технологические мероприятия, направленные на улучшение и оптимизацию выбранной технологии.В результате спроектирована сборка формы со стрежнями для отливки. Построена литниковая система отливки. Выявлены и устранены критичные элементы литникового хода отливки, рассчитаны прибыли. Введена безопочная формовка, пенокерамические фильтра и экзотермические прибыли. Что способствовало получению годного литья с контрольной сборки и заливки.
The theme of the final qualification work: Design of the opti-small technology for the manufacture of the Carter casting.This work is devoted to the development and selection of the optimal casting technology using modeling of casting processes in pro-gram support. The tasks that were solved during the study:1. Process capacities of the manufacturing plant were studied;2. Modern tools for modeling foundry processes were considered;3. The technology of modeling the processes of casting alloys, temperature distribution in the casting body was studied;4. Based on the obtained data from the modeling of casting pits, technological measures aimed at improving and optimizing the selected technology were selected.As a result, the assembly of the mold with rods for otlivka was designed. A gate casting system was built. Critical elements of casting gate stroke were identified and eliminated, profits were calculated. Non-folding molding, foam ceramic filters and exothermic profits were introduced. This contributed to the production of suitable casting with control of assembly and casting.
Document access rights
Network | User group | Action | ||||
---|---|---|---|---|---|---|
ILC SPbPU Local Network | All | |||||
Internet | Authorized users SPbPU | |||||
Internet | Anonymous |
Usage statistics
Access count: 0
Last 30 days: 0 Detailed usage statistics |