Table | Card | RUSMARC | |
Allowed Actions: –
Action 'Read' will be available if you login or access site from another network
Group: Anonymous Network: Internet |
Annotation
В данной работе проектируется электрическая часть тепловой электростанции 6x300 МВт, работающей на газомазутном топливе с применением необходимого оборудования и технических решений. Задачи, которые решались в ходе проектирования: 1. Выбор основного электрооборудования. 2. Сравнение структурных схем станции и выбор наиболее выгодной по результатам технико-экономического расчета. 3. Расчет токов короткого замыкания в характерных точках. 4.Выбор коммутационных аппаратов, токоведущих частей и измерительных трансформаторов тока и напряжения. 5. Обзор состава механизмов и электродвигателей собственных нужд. 6. Проверка успешности самозапуска. 7. Расчет времени пуска от рабочего ТСН. 8. Решение задач регулирования производительности механизмов собственных нужд. В результате было выбрано основное оборудование структурная схема с точки зрения экономической целесообразности. Затем произведен расчет токов короткого замыкания, по результатам которого было выбрано электрические аппараты и токоведущие части. Помимо этого, был выбран ТСН и РТСН. В конечном итоге, представлена главная схема электрических соединений, схема заполнения, план и разрез ОРУ 220 кВ, а также предложены варианты регулирования производительности некоторых механизмов собственных нужд электростанции.
In this paper, the electrical part of the 6x300 MW thermal power plant operating on gas and oil fuel is being designed using the necessary equipment and technical solutions. Tasks that were solved during the design process: 1. Selection of the main equipment. 2. Comparison of structural schemes of the station and the choice of the most profitable according to the results of technical and economic calculation. 3. Calculation of short-circuit currents at specific points. 4. Selection of switching devices, conducting parts and measuring current and voltage transformers. 5. A review of the composition of mechanisms and electric motors of own needs. 6. Checking the success of self-start. 7. Calculation of start-up time from the working TSN 8. Solving problems of productivity regulation of mechanisms for their own needs. As a result, the main equipment and the structure schemes were chosen from the economic point of view as well. Then there is the calculation of the short circuit currents for the selection of electrical apparatus and conducting parts. What is more, the selection of working and self-supporting transformers of own needs were chosen. All in all, the main circuit of electrical connections, filling scheme, plan and section of the 220 kV ODD was developed, it also was offered options for productivity regulation of some mechanisms for the powerplants own needs.
Document access rights
Network | User group | Action | ||||
---|---|---|---|---|---|---|
ILC SPbPU Local Network | All | |||||
Internet | Authorized users SPbPU | |||||
Internet | Anonymous |
Usage statistics
Access count: 5
Last 30 days: 3 Detailed usage statistics |