Table | Card | RUSMARC | |
Allowed Actions: –
Action 'Read' will be available if you login or access site from another network
Group: Anonymous Network: Internet |
Annotation
Тема выпускной квалификационной работы: «Разработка методики моделирования емкостных датчиков давления». Данная работа посвящена исследованию мембраны в емкостном датчике давления и разработка методики ее моделирования. Задачи, которые решались в ходе исследования: 1. Произвести анализ датчиков, принцип их работы. 2. Разработать методику моделирования, произвести моделирование мембраны, с нахождением граничных условий. 3. Исследование мембраны с изменением ее параметров. 4. Исследование мембраны с жестким центром с мембраной без жесткого центра. Работа проведена в программе ELCUT, где собиралась значительная часть фактического материала: результаты моделирования, показания деформации и упругости, при различных изменениях параметров мембраны. Моделирование проводилось с использованием метода конечных элементов при помощи программного обеспечения ELCUT 5.1 PRO. В результате были даны рекомендации по параметрам мембраны в емкостном датчике давления для его оптимизации.
The topic of the final qualifying work: "Development of a methodology for modeling capacitive pressure sensors". This work is devoted to the study of a membrane in a capacitive pressure sen-sor and the development of a methodology for its modeling. Tasks that were solved during the study: 1. Analyze the sensors, the principle of their operation. 2. To develop a modeling methodology, to simulate the membrane, with the finding of boundary conditions. 3. Examination of the membrane with changes in its parameters. 4. Examination of a membrane with a rigid center with a membrane without a rigid center. The work was carried out in the ELCUT program, where a significant part of the factual material was collected: simulation results, indications of deformation and elasticity, with various changes in the parameters of the membrane. The modeling was carried out using the finite element method using the ELCUT 5.1 PRO software. As a result, recommendations were given on the parameters of the membrane in the capacitive pressure sensor for its optimization.
Document access rights
Network | User group | Action | ||||
---|---|---|---|---|---|---|
ILC SPbPU Local Network | All |
![]() ![]() |
||||
Internet | Authorized users SPbPU |
![]() ![]() |
||||
![]() |
Internet | Anonymous |
Usage statistics
|
Access count: 0
Last 30 days: 0 Detailed usage statistics |