Table | Card | RUSMARC | |
Allowed Actions: –
Action 'Read' will be available if you login or access site from another network
Group: Anonymous Network: Internet |
Annotation
В данной ВКР описан процесс изготовления детали «Втулка тонкостенная». Оформлена технологическая карта изготовления детали. А также разработан комплект документов для технологического процесса. Проделан сравнительный анализ с деталью-прототип и дана оценка детали-прототип. Проведена проработка чертежа «Втулка - тонкостенная» и доработка некоторых размеров. При проектировании технологического процесса изучены следующие этапы: назначение детали, проанализирован чертеж детали, дана оценка соответствия чертежа детали по нормам и требованиям ЕСКД, подобрана деталь прототип, выбрано необходимое технологическое оборудование. В ВКР спроектирован фасонный режущий инструмент (призматический). Фасонные резцы предназначены для обработки наружных, внутренних и торцовых поверхностей сложного профиля. Резцы фасонного типа, являются специальным инструментом, потому что используются для обработки сложных поверхностей детали на станках токарной группы. В ВКР разработана оснастка для операции сверление на радиально-сверлильном станке. Спроектировано установочно-зажимное приспособление для сверлильной операции, данное приспособление называется – кондуктор для сверления отверстий.
This GQW describes the manufacturing process of the part "Thin-walled bushing". Formalized technological map of manufacturing the part. And also developed a set of documents for the technological process. The comparative analysis with the detail-prototype is made and the estimation of the detail-prototype is given. The drawing "Bushing - thin-walled" and finalization of some dimensions was carried out. When designing the technological process the following stages are studied: the purpose of the part, the drawing of the part is analyzed, the conformity of the drawing of the part to the norms and requirements of the ESCD is evaluated, the prototype part is selected, the necessary technological equipment is chosen. A shaped cutting tool (prismatic) is designed in the GQW. Shaped cutters are designed for machining external, internal and face surfaces of complex profile. Chamfered cutters are special tools, because they are used for machining complex surfaces of the part on lathe group machines. The tooling for drilling operation on a radial drilling machine is developed in GQW. Designed mounting and clamping fixture for drilling operation, this fixture is called - conductor for drilling holes.
Document access rights
Network | User group | Action | ||||
---|---|---|---|---|---|---|
ILC SPbPU Local Network | All |
![]() ![]() |
||||
Internet | Authorized users SPbPU |
![]() ![]() |
||||
![]() |
Internet | Anonymous |
Usage statistics
|
Access count: 0
Last 30 days: 0 Detailed usage statistics |