Table | Card | RUSMARC | |
Allowed Actions: –
Action 'Read' will be available if you login or access site from another network
Action 'Download' will be available if you login or access site from another network
Group: Anonymous Network: Internet |
Annotation
Данная работа посвящена разработке проектной документации на строительство бизнес-центра с консольным вылетом 20 м по адресу: г. Санкт-Петербург, Приморский проспект, участок 119. Разделы проектной документации разрабатывались согласно Постановлению Правительства РФ от 16.02.2008 Nº87 (ред. от 15.09.2023) "О составе разделов проектной документации и требованиях к их содержанию". Целью исследовательской части работы является расчет и конструирование пространственного каркаса здания с наклонными колоннами, формирующими консоли. Задачи, которые решались в ходе исследования: 1. Расчет модели здания с консолью в линейной постановке. 2. Учет нелинейной работы железобетона методом «Инженерная нелинейность», анализ жесткостей. 3. Учет физической нелинейности с применением диаграмм деформирования бетона и арматуры. 4. Конструирование наиболее сложных узлов сопряжения несущих конструкций в консольной части здания. В результате исследовательской части работы были выполнены линейный и физически-нелинейные расчеты пространственного каркаса бизнес-центра. Произведен анализ и сравнение полученных результатов. Также был проведен анализ и сравнение жесткостей стержневых и пластинчатых элементов. В результате выполнения выпускной квалификационной работы была разработана проектная документация на строительство бизнес-центра с консольным вылетом 20 м.
This work is devoted to the development of design documentation for the construction of a business center with a cantilever overhang of 20 m at the address: St. Petersburg, Primorsky Prospekt, site 119. Sections of the design documentation were developed in accordance with Decree of the Government of the Russian Federation dated February 16, 2008 No. 87 (as amended on September 15.2023) "On the composition of sections of design documentation and requirements for their content." The purpose of the research part of the work is to calculate and design the spatial frame of a building with inclined columns forming consoles. Problems that were solved during the study: 1. Calculation of a building model with a console in a linear formulation. 2. Accounting for the nonlinear work of reinforced concrete using the "Engineering nonlinearity" method, analysis of rigidities. 3. Accounting for physical nonlinearity using deformation diagrams of concrete and reinforcement. 4. Design of the most complex junctions of load-bearing structures in the cantilever part of the building. As a result of the research part of the work, linear and physically nonlinear calculations of the spatial frame of the business center were performed. The results obtained were analyzed and compared. An analysis and comparison of the stiffness of rod and plate elements was also carried out. As a result of completing the final qualifying work, design documentation was developed for the construction of a business center with a cantilever overhang of 20 m.
Document access rights
Network | User group | Action | ||||
---|---|---|---|---|---|---|
ILC SPbPU Local Network | All | |||||
Internet | Authorized users SPbPU | |||||
Internet | Anonymous |
Table of Contents
- Листы и виды
- график ресурсов
- Листы и виды
- СГП
- Листы и виды
- Лист1
- Листы
- 1 - Схема планировочной организации земельного участка
- Листы
- 2 - Схема эвакуации -1 этажа
- Листы
- 3 - Схема эвакуации 1 этажа
- Листы
- 4 - Схема эвакуации 6 этажа
Usage statistics
Access count: 0
Last 30 days: 0 Detailed usage statistics |