Table | Card | RUSMARC | |
Allowed Actions: –
Action 'Read' will be available if you login or access site from another network
Group: Anonymous Network: Internet |
Annotation
Выполнено численное моделирование вихревых структур, формируемых импульсной турбулентной струей, в осесимметричной (2D) и 3D постановках, на основе URANS подхода с использованием стандартной k-ε модели турбулентности. Значение числа Рейнольдса было задано равным 14,5∙10^3. Задача рассмотрена в изотермических и неизотермических условиях, когда перепады температур между приточной струей и окружающей средой был задан равным 10, 20 и 40℃. Для изотермических вариантов расчетов в 2D постановке выполнена оценка влияния расстояния до открытой боковой границы расчетной области. Показано, что при высоте расчетной области равной 24 калибрам и большей, получаемые результаты расчетов не изменяются. В 2D постановке проведена оценка влияния входного распределения на характеристики вихревого облака. Показано, что входной профиль оказывает слабое влияние на получаемые результаты. Расчеты при фиксированном перепаде температуры показывают, что с увеличением угла между направлением подачи импульсной струи и гравитационной силы (от 0° до 180°) дальность распространения вихревого облака в фиксированные моменты времени возрастает. Для предельных случаев при углах подачи 0° и 180° в 2D постановке выполнена оценка влияния перепада температуры на характеристики вихревого облака.
Numerical modeling of vortex structures formed by an impulse turbulent jet in axisymmetric (2D) and 3D formulations has been performed on the basis of the URANS approach using the standard k-ε turbulence model. The value of the Reynolds number was set equal to 14,5∙10^3. The problem was considered under isothermal and non-isothermal conditions, when the temperature differences between the impulse jet and the environment were set to 10, 20 and 40℃. For isothermal cases performed in 2D formulation, the influence of the distance to the open lateral boundary of the computational domain is evaluated. It is shown that at the height of the computational region equal to 24 calibers and higher, the obtained calculation results do not change. In 2D formulation, the influence of the inlet distribution on the vortex cloud characteristics was evaluated. It is shown that the inlet profile has a weak influence on the obtained results. Calculations at a fixed temperature difference show that the vortex cloud propagation range at fixed moments of time increases with increasing angle between the impulse jet feed direction and gravitational force (from 0° to 180°). For the cases at the feed angles of 0° and 180°, the influence of the temperature differences on the vortex cloud characteristics is evaluated in 2D formulation.
Document access rights
Network | User group | Action | ||||
---|---|---|---|---|---|---|
ILC SPbPU Local Network | All |
![]() ![]() |
||||
Internet | Authorized users SPbPU |
![]() ![]() |
||||
![]() |
Internet | Anonymous |
Usage statistics
|
Access count: 1
Last 30 days: 1 Detailed usage statistics |