Details

Allowed Actions: View

Annotation

Цель данной статьи заключается в выяснении влияния способа определения коэффициента теплопроводности на точность его расчета. Расчеты производились для трех видов газообразного топлива: природного газа, попутного газа и промышленного газа. Приведены расчеты коэффициента теплопроводности двумя способами: упрощенный расчет по правилу аддитивности, используя массовые или объемные доли компонентов продуктов сгорания и более точный расчет по уравнению Масона и Саксена. Полученные результаты показали существенное влияние способа определения коэффициента теплопроводности продуктов сгорания на точность результата. С увеличением температуры продуктов сгорания погрешность определения коэффициента теплопроводности в обоих случаях уменьшается за счет увеличения значений коэффициентов теплопроводности. Использование упрощенных методов расчета приводит к увеличению коэффициента теплопроводности в среднем на 6 % - 3 % в зависимости от температуры продуктов сгорания по сравнению со значениями, полученными по уравнению Масона и Саксена.

The purpose of this article was to clarify the influence of the method of determining the coefficient of thermal conductivity on the accuracy of its calculation. Calculations were made for three types of gaseous fuels: natural gas, associated gas and industrial gas. Calculations of the thermal conductivity coefficient are given in two ways: a simplified calculation according to the additivity rule, using mass or volume fractions of components of combustion products and a more accurate calculation according to the Mason and Saxen equation. The results obtained showed a significant influence of the method of determining the thermal conductivity of combustion products on the accuracy of the result. With an increase in the temperature of the combustion products, the error in determining the thermal conductivity coefficient in both cases decreases due to an increase in the values of the thermal conductivity coefficients. The use of simplified calculation methods leads to an increase in the thermal conductivity coefficient by an average of 6% - 3%, depending on the temperature of the combustion products, compared with the values obtained by the Mason and Saxen equation.

Usage statistics

stat Access count: 9
Last 30 days: 3
Detailed usage statistics