Table | Card | RUSMARC | |
Allowed Actions: View |
Annotation
Исследована возможность синтеза псевдосплава вольфрам - медь с использованием в качестве источника нагрева высокоэкзотермической реакции горения кремния в азоте. За счет тепла, выделяющегося в результате горения, спрессованные из порошков вольфрама и меди (85 масс. % W + 15 масс. % Cu) заготовки нагревались выше температуры плавления меди. Образцы полученных псевдосплавов обладали относительной плотностью 0,76. Добавка в исходную шихту 0,35 масс. % порошка Со позволила увеличить относительную плотность до 0,86.
The possibility of synthesizing a tungsten - copper pseudo-alloy using a highly exothermic combustion reaction of silicon in nitrogen as a heating source due to the heat released as a result of combustion, the blanks compressed from tungsten and copper powders (85 wt. % W + 15 wt. % Cu) were heated above the melting point of copper. Burning was investigated. The samples of the obtained pseudo-alloys had a relative density of 0.76. The additive to the initial charge is 0.35 wt. % of the Co powder allowed to increase the relative density to 0.86.
Included in
Usage statistics
Access count: 14
Last 30 days: 0 Detailed usage statistics |